Cartridge Unit Bearings

Contact Now

An old-style cup-and-cone bottom bracket.The lockring wrench is about to loosen the lockring, the pin wrench is engaging two of the holes in the adjustable cup.(Some cartridge bearings do use these same tools.) Another article gives instructions on servicing cup-and-cone bottom brackets.: A cartridge bottom bracket. The splined tool is shown above the bottom bracket.

 

 

The bearing is encased in rubber for reduced vibration and noise, and it has an extended inner ring on one side for extra shaft support. This bearing cartridge unit is suitable for applications including conveyors, ventilating equipment, and heating and air conditioning equipment, among others.Cartridges. Our cartridges are available in metallic or rubber. The bearing inserts have grade 10 balls and super-finished ball paths to support proper lube film and reduce noise. Metallic Design Attributes. Mounts in straight bore housings. Comes complete with wide inner-ring bearing insert and three-piece “R” seal. 

 

 

 

Bearing Number Bore Dia Outer DIa Width Size
AMI UGC308-24 Cartridge Unit Bearings 31.85 kN 2.3 kg 44.45 mm 105 mm
AMI UGC309-27 Cartridge Unit Bearings 21 mm M6x1 12.8 kN 15.5 mm
AMI UGC307-23 Cartridge Unit Bearings 5.79 Hz 85 mm 6.24 Hz 59 mm
AMI UGC309 Cartridge Unit Bearings Unirex N2 30.0000 in Steel Cast Iron
AMI UEC206-20 Cartridge Unit Bearings EX205G2T04 SCCE205 37.4 mm 25 mm
AMI UEC206-19 Cartridge Unit Bearings 90.5 mm 0.55 kg 8 Nm 35.7 mm
AMI UEC206-18 Cartridge Unit Bearings 55.6 mm -20 °C 55 mm 19.3 mm
AMI UEC206 Cartridge Unit Bearings Single Lip Self Centering Not Applicable Standard
AMI UEC205-16 Cartridge Unit Bearings -40 °C 56 mm 11.2 kN 38.1 mm
AMI UEC205-15 Cartridge Unit Bearings 130 mm 24 mm 3 mm 1.4
AMI UEC205-14 Cartridge Unit Bearings 20 mm 18.2 kN 30 mm 29.6 kN
AMI UEC204 Cartridge Unit Bearings 71.3 mm 222 mm 74.5 mm 184 mm
5/10