QM INDUSTRIES QMF08J107SEB Flange Block Bearings

Recommended tightening torque for set screw:16.8 Nm; L:162 mm; T min.:-20 °C; J:130 mm; A2:58.4 mm; G:M6x1; Designation of housing:F211N-; d:50.8 mm; s1:27.8 mm; A:43 mm;

Material Bearing:440C Stainless Steel; Bearing Unit, Type:Diamond Shape Flange; Unit Body Material:[Cast Iron] Zinc All; Bearing Unit, Type:Diamond Shape Flange; Basic Load Rating Cr (Dynamic)(N):11300; Unit, Type:Ball Bearing Units; Surface Treatment:Not Provided; RoHS:6; Basic Load Rating Cor (Sta

C Chamfered:Provided; Bearing Used:Deep Groove Ball Bea; Width T(mm):35 ～ 50; Bearing Used:Deep Groove Ball Bea; Housing Material:304 Stainless Steel; Seals:ZZ (Double Shield); Thickness, Height Indication:T Selection, h Confi; Type:Bearings with Housin; Bearing Retained:No; Lateral Width L(mm):73;

Type:Ball; Retainer Type:Punching; Inner/Outer Ring Material:Steel; Seal, Shield Symbols:LB; B:15; Specifications/Environment:Standard; Outer Ring Shape:Flat; Size Standards:Metric System; Bearing Style:Rubber Sealed; Max. Allowed rpm(rpm):17000;

Designation of bearing:EX207G2T20; C:25.7 kN; C0:15.2 kN; H1:19 mm; B1:51.1 mm; A1:31 mm; H2:94 mm; Weight:1.8 kg; s1:36.3 mm; B:37.6 mm;

Size Standards:Metric System; Type:Ball; Type:Ball; Max. Allowed rpm(rpm):6000; Days to Ship:Quote; Seal, Shield Symbols:ZZ; Size Standards:Metric System; d:60; Load Direction:Radial; D:110;

RoHS:6; Type:Bearings with Housin; Days to Ship:8 Days; Bearing I.D. d(mm):12; Bearing Material:[Steel] Steel; Shape:T-Shaped; Mount Type:Base Face Type; Bearing Part Number:6901; T(mm):25 ～ 40; Bearing Used:Deep Groove Ball Bea;

Thickness, Height Indication:T Selection, h Confi; C Chamfered:Not Provided; Bearing Part Number:6902; Type:Bearings with Housin; Shape:T-Shaped; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):15; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea;

Characteristic rolling element frequency, BSF:4.12 Hz; Nlim (grease):10,000 rpm; Max operating temperature, Tmax:120 °C; Brand:NTN; Characteristic cage frequency, FTF:0.38 Hz; Mass:0.11 kg; f0:13.2; B:14 mm; D:47 mm; Static load, C0:6.65 kN;

H:98 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; L1:225 mm; Designation of housing:SP206-207/72N-; C:25.7 kN; L:274 mm; G:R1/8"; d:36.51 mm; A5:23.5 mm;

d:5.1181 in; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:38400 lbf; db - Cone Backface Backing Diameter:5.94 in; G1 - Heat Generation Factor (Roller-Raceway):326.4; da - Cone Frontface Backing Diameter:5.67 in; Cg - Geometry Factor:0.127; R - Cone Backf

Size Standards:Metric System; Outer Ring:With Outer Ring; Low Torque Specification:No; Internal Symbol:No; O.D.(Ø):190; Types:No; Grease Type:AS2S1; Holder Symbol:No; Number of Raceway Ring Rows:Single Row; Precision:Grade 0;

J:49 mm; L1:21 mm; S:17 mm; Designation of bearing:EX201G2; Dz:54 mm; B:34 mm; Designation of closed end cover:SCCE204; d1:32.4 mm; A1:20 mm; H2:64 mm;

K - Factor7:1.11; R - Cone Backface To Clear Radius1:1.020 mm; B:12.017 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:3020 lbf; Series:A6000; a - Effective Center Location3:-1.5 mm; Ab - Cage-Cone Frontface Clearance:2.3 mm; Bearing Weight:0.10 Kg; G1 - Heat Generation Factor (Roller-Racew

Weight:0.024 Kg; Features:Contact Seals; C0r - Static Load Rating:2.4 kN; Radius Rs min:0.300 mm; Oil Limiting Speed:33000 rpm; Outside Ring Width B:8.000 mm; Clearance:C3; Grease Limiting Speed:22000 rpm; Bore Size d:12 mm; Outside Diameter D:30.000 mm;