AMI UGC315-47 Cartridge Unit Bearings

Weight:0.65 kg; T min.:-40 °C; Designation of bearing:US205-15G2T04; Designation of open end cover:SCOU205-15; T max.:100 °C; Designation of closed end cover:SCC205; G:M6x1; d:23.81 mm; B:27 mm; Recommended tightening torque for set screw:3.7 Nm;

T min.:-20 °C; T max.:200 °C; J:64 mm; B:22 mm; e:15 mm; Designation of housing:F203N-; C0:4.78 kN; Z:36.3 mm; A2:31 mm; C:9.55 kN;

A:34 mm; Designation of bearing:US207-23G2T20; Z:30 mm; S:8.5 mm; T min.:-20 °C; A2:42.5 mm; C0:15.2 kN; d:36.51 mm; e:19 mm; Weight:1.07 kg;

Bearing Outer Ring Material:Steel; Shaft Attachment (2):Eccentric Collar; Max Bearing Speed:6500 rpm; End Cap Groove:No; Ship Weight:1.07 LB; Ball Grade:Class 10; Bearing Series:206 Series; Seal Type:Single Lip; Housing Type:2 Bolt Light Duty Fl; Self Aligning:Self Centering;

L1:42 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; G:M6x1; A:38 mm; N1:19 mm; C0:4.78 kN; d:17.46 mm; B1:28.6 mm; A1:22 mm;

e:34 mm; C0:49.5 kN; G:M10x1; A1:22 mm; A:56 mm; A2:78.5 mm; J:159 mm; Weight:5.9 kg; d:74.61 mm; B:77.8 mm;

A:31 mm; G:R1/8"; H:120 mm; B:42.8 mm; T max.:100 °C; H2:61 mm; Designation of bearing:EX209-26G2T04; T min.:-40 °C; d1:62 mm; SW:3.97 mm;

C0:19.9 kN; T min.:-20 °C; s1:17 mm; d:38.1 mm; L:135 mm; Designation of bearing:US208-24G2T20; L3:45 mm; SW:3.97 mm; L1:85 mm; H:100 mm;

Grease Type:Unirex N2; UPC:782475304950; Bearing Insert Material:Steel; Expansion Type:Non-Expansion; d:2.4375 in; Flinger Material:Steel; Seal Type:Shield; Bearing Locking Device:Tapered Adapter Slee; Ship Weight:11.92 LB; Ball Grade:Class 10;

Designation of housing:T209N-; N:29mm; d1:62 mm; S:11 mm; d:45 mm; H1:102 mm; B:30.2 mm; H2:83 mm; T max.:100 °C; L:144 mm;

S:14.9 mm; Designation of bearing:US212-39G2T20; H2:140 mm; B:53.7 mm; C:52.5 kN; G:R1/8"; Designation of housing:PE212N-; N:18mm; T max.:200 °C; L1:71 mm;

C0:29.2 kN; Designation of bearing:ES211-35G2T20; s1:36.95 mm; Recommended tightening torque for set screw:16.8 Nm; A1:20 mm; J1:86 mm; B:32.5 mm; J:184 mm; T max.:200 °C; Designation of housing:FA211-;

Designation of bearing:SUC211-32; C0:25.5 kN; Designation of housing:SP211N-; C:34 kN; Weight:4.06 kg; S:22.2 mm; Recommended tightening torque for set screw:18.7 Nm; T min.:-20 °C; H1:23 mm; A:60 mm;

Bore:1.181 Inch | 30 Mill; Mass:0.36 kg; B:19 mm; a min:3.07 mm; Characteristic rolling element frequency, BSF:4.14 Hz; b max:2.2 mm; Manufacturer Item Number:6306ZNRS; Ca min:4.67 mm; Characteristic inner ring frequency, BPFI:4.92 Hz; Fatigue limit load, Cu:0.68 kN;

Fatigue limit load, Cu:3.45 kN; Contact angle α:15 °; Static load, C0:69.2 kN; Da max:131.5 mm; Radial rigidity:878 N/µm; Characteristic outer ring frequency, BPF0:8.73 Hz; Characteristic rolling element frequency, BSF:7.5 Hz; Axial displacement K Factor:0.96; d:90 mm; Mass:1.15 kg;