Cartridge Unit Bearings

Contact Now

An old-style cup-and-cone bottom bracket.The lockring wrench is about to loosen the lockring, the pin wrench is engaging two of the holes in the adjustable cup.(Some cartridge bearings do use these same tools.) Another article gives instructions on servicing cup-and-cone bottom brackets.: A cartridge bottom bracket. The splined tool is shown above the bottom bracket.

 

 

The bearing is encased in rubber for reduced vibration and noise, and it has an extended inner ring on one side for extra shaft support. This bearing cartridge unit is suitable for applications including conveyors, ventilating equipment, and heating and air conditioning equipment, among others.Cartridges. Our cartridges are available in metallic or rubber. The bearing inserts have grade 10 balls and super-finished ball paths to support proper lube film and reduce noise. Metallic Design Attributes. Mounts in straight bore housings. Comes complete with wide inner-ring bearing insert and three-piece “R” seal. 

 

 

 

Bearing Number Bore Dia Outer DIa Width Size
AMI UCLCX08 Cartridge Unit Bearings 81 mm NTN NTN 2 mm
AMI UCLCX07-22 Cartridge Unit Bearings 48 mm 70 mm 5.5 Nm 27.2 mm
AMI UCLCX07-20 Cartridge Unit Bearings 0.37 kN 0.6 mm 9.9 kN 40.5 mm
AMI UCLCX06-20 Cartridge Unit Bearings 117 mm 37 mm M6x1 22 Nm
AMI UCLCX06-19 Cartridge Unit Bearings 19 mm SUC210-31 101.6 mm -20 °C
AMI UCLCX06-18 Cartridge Unit Bearings 8,400 rpm 50 mm 55 mm 7.31 Hz
AMI UCLCX06 Cartridge Unit Bearings SCO209-45 M14 25 mm 10.2 mm
AMI UCLCX05 Cartridge Unit Bearings 17.4 mm 34.8 mm SP203-205/52- 7.88 kN
AMI UCLC213 Cartridge Unit Bearings SCOU205-16 46.3 mm 3.9 Nm 38 mm
AMI UCLC211 Cartridge Unit Bearings 209 Series Std Retainer 1.6875 in Non-Expansion
AMI UCLCX09-27 Cartridge Unit Bearings 17.5 mm -40 °C 21.45 mm 47.6 mm
AMI UCLCX09-28 Cartridge Unit Bearings 2 mm 38 mm 21 mm 25 mm
2/10